TechKote WA 2977 G Water-Based Black High Gloss Coating
TechKoteDescription:
TechKote WA 2977 G, is a sprayable, high gloss, black water-based coating that serves as both a Direct-to-Metal primer and as a Topcoat over primer.
TechKote WA 2977 G is not only Zero VOC and fast drying with good adhesion and early water resistance, it does not contain any lead, chrome or any Hazardous Air Pollutants.
Typical Properties (Not Specifications):
| Appearance in concentrate | Dark blackish/bluish in color |
| Appearance after applied | Black Gloss |
| Density | 8.9 lb/gal |
| Viscosity cPs Spindle #62 at 30 rpm | 500-1000 cps |
| Solids by Weight | 42-45% |
| pH | 8-9.5 |
| Recommended DFT | 2.5-3.5 mil |
| Gloss Std 423-0023 at 60 degree | 60-70 |
| Adhesion Std 423-0012 | 5B |
| Corrosion Resistance Std 423-0010 | Pass 168 hours |
| Light Exposure Std 1027,337 | Pass 2000 hours |
| Theoretical Coverage 100% Transfer efficiency | 611 sq.ft @ 1 mil dft. |
Health & Safety
TechKote WA 2977 G is available at our Brighton, Michigan facility in 55-gallon drums, 330and 275-gallon totes and 5 gallon pails.
Storage And Handling: See Safety Data Sheet Before Use.
Do not freeze. Store at temperature between 45-100 degrees Fahrenheit. Do not pressurize container or reuse empty container.
Non-Warranty: While the information and recommendations sent forth herein are believed to be accurate as of the date thereof, Fortech Products, Inc. makes no warranty with respect thereto and disclaims all liability for reliance therein.
Last Updated: 3/6/2024
Features / Benefits
- Zero VOC
- HAP Free
- Fast Dry
- Excellent Adhesion as DTM and as Top Coat
- Corrosion Resistant
- High Gloss Black in Appearance when Dry
- Great Excellent Early Water Resistance
- Chemical Resistant - Fuels, Oils, Acids
Mix / application & Use
Mix completely before use. Continue a slow mix while in use. TechKote WA 2799 G has a minimum film thickness of 2.5 mils (unless otherwise directed by the customer approval). TechKote WA 2799 G is an air-dry coating, however, to reduce dry time, it may be oven dried as long as part temperature does not exceed 190 degrees Fahrenheit.
May by spray applied using: Bells, HVLP, HPLV, Conventional, Airless or Air Assisted Airless spray applicators.